Glass Ionomer Luting Cement

Product Description:

dline Glass Ionomer Luting Cement is a professional, chemical-cure fixing cement designed for a wide range of permanent cementation needs. It provides high adhesion to dentin, enamel, and non-precious alloys. Key features include a low film thickness for a precise fit, good translucency for aesthetic results, and excellent biocompatibility.

Intended Use / Applications:

Permanent cementation of crowns and bridges.

Cementation of inlays and onlays.

Fixing of orthodontic brackets and bands.

Key Features & Benefits:

Material Type: Chemical-cure Glass Polyalkenoate Cement.

High Adhesion: Creates a strong, reliable bond with dentin, enamel, and non-precious alloys.

Low Film Thickness: Ensures restorations can be seated completely and accurately.

Good Translucency: Provides aesthetically pleasing results.

Excellent Biocompatibility: Safe for patients and minimizes sensitivity.

Directions for Use (Mixing & Application):

Note: For deep cavities, use a calcium hydroxide liner first.

Mixing Ratio: The standard ratio is 1 level spoon of powder to 2 drops of liquid.

Mixing Technique: Use a glass slab or paper pad. Divide the powder into two parts. Mix the first half with the liquid for 10 seconds, then incorporate the remaining powder. The total mixing time should be approximately 30 seconds.

Application: The total working time, including mixing, is 2 minutes. Apply the mixed cement to both the restoration and the prepared tooth immediately.

Excess Removal: Excess cement can be removed immediately or after the final set. Do not attempt to remove it during the setting phase (1.5 - 6 minutes from the start of mixing) as this may impair adhesion.

Finishing: The restoration is ready for finishing 8 minutes after the start of mixing.

Warnings & Precautions:

Allergies: Do not use on patients with known allergies to any of the ingredients.

Safety Measures: Always wear protective gloves, clothing, and eye/face protection.

Eye Contact: In case of eye contact, rinse cautiously with water for several minutes and seek medical attention.

Instrument Cleaning: This cement is highly adhesive. Clean all instruments immediately after use, before the cement sets.

Storage:

Store tightly closed at 5-25°C in a dry place.

Protect from moisture, direct sunlight, and heat sources.

Keep out of the reach of children.

Packaging / Kit Contains:

20g powder, 13g liquid, 1 measuring scoop, 1 mixing pad.